Сontroller for stairs light MONO 32-steps 12-24V 2xPIR sensors

Fully automatic, turns on the light when it senses someone walking and turns off the light when they leave.

With anti-leakage system, stable output, safer and more secure use.

Touch the setup button to adjust the speed of the lights off on the controller. 

Long press for 5 seconds to set the number of stair lights, blue light means the serial number light is on. Click the button until all lights are on, up to 32 stair lights can be controlled, press and hold again to confirm.

Installation Tips:

1. When the LED strips is plugged into the controller, be sure to find the socket of the corresponding serial number.

2. The controller and sensor can be in the electric box.

3. Be sure to connect the positive and negative poles, the red is the positive, the blue is the negative, and the low-voltage current is DC 12-24V, not AC 220V/110V.

4. It is recommended to bury the line in advance and install the lights when the stairs are decorated.

5. The wiring needs to be connected in case of power off, to avoid short circuit.

Specifications:

Voltage: DC 12V/DC 24V

Power: ≤350W MAX

Sensors: 2 (A, B)

Channel: 32 (set to 1-32 step)

Operating Mode: Photoelectric

Static power consumption: 5W

Induction distance: 3M

Output wire length: 5 meters + 5 meters

Package Included:

1 x LED Controller

2 x Sensors

2 x Output Cables