SPI signal amplifier SP901E is compatible with all kinds of dual 5V-TTL signals.
Simultaneous signal output to 4 or 8 channels. Each channel can drive the same number of LED pixels as the main controller.
Output 8 channels for addressable LED strip with single data wire like WS2812B, WS2811, SK6812RGB, SK6812-RGBW, SM16703, etc.
Also output 4 channels for LED strip with address with data and clock wires WS2801, APA102, SK9822 or double data wires such as WS2813, WS2815
You can use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time, control DC12V WS2811, DC12V WS2815, DC12V 1903, DC12V 6803 at the same time through this signal booster since they have the same signal.
DC5V ~ 24V Wide operating voltage range, without the ability to adjust the output voltage. This means that the output voltage of the power supply must be the same as the operating voltage of your LED strip. The current through the amplifier is limited, when the current consumption is too high, it is necessary to add a power supply of the corresponding voltage.
Multiple signal amplifiers can be synchronized.
Especially suitable for small to medium sized lighting projects.
Compatible with K-1000C, SP105E, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller.
DMX Signal Amplifier
Receives DMX512 signal - 1 port
Outputs to 4 ports
Standard sync capability for DMX IN and DMX OUT amplifiers
Parameters:
Working voltage: DC 5V ~ 24V
Working temperature: -20-60 ° C
Output: 8 channels / 4 channels
Compatible ic type: WS2812B, WS2811, SK6812, SK6812-RGBW, SM16703,
WS2813, WS2815, CS8812, AL2815, WS2801, APA102,
SK9822, UCS1903, LPD6803, LPD8806, APA102
Power consumption: <1W
Size: 140mm x 56mm x 28mm
Precautionary measures:
The controller cannot regulate the output voltage at VCC. This means that the output voltage of your power supply should be the same as the operating voltage of your LED lamp. If you need 5V input, please use a 5V power supply, do not use more than 5V power supply
The current through the amplifier is limited, when the current consumption is higher, it is necessary to additionally add a power supply of the corresponding voltage
Data sheet
- Channels
- 4
8
- Voltage
- 5-24V
- Size
- 112x56x28mm
- Working temperature
- -20...+60°C
- Output voltage
- 5
12
24V
- Compatibility
- 2801
APA102
CS8812
LPD6803
LPD8806
SK6812
SK6812-RGBW
SK9822
SM16703
UCS1903
WS2811
WS2812B
WS2813
WS2815
- Certification
- CE, RoHS
- Warranty
- 2 years
Comments All reviews
Summary
0
(0 Reviews)
Select a row below to filter reviews.
No customer reviews for the moment.