5% discount on aluminum profiles until the end of September | PROMO CODE: PROFIle5
Wifi SmartStair_V4 controller 16 steps for stairs light 12-24V
- Controllers to illuminate the stairs Smart Stair System 12-24V
- The controller is designed for 16 or 32 steps
- The most unusual and popular project, fully developed by our company, is the Smart Stair controller or
Wifi SmartStair_V4 smart ladder.
- First of all, it is a question of your safety, since the first and last steps light up slightly in the dark time of the day, marking the beginning of the stairs. The controller turns on the backlight on the steps one at a time. This is the most popular efect. But you can choose other efects ( total is 9 different efects).
- When you step on the first step, the stairs light up with a beautiful effect. You can choose, adjust the speed of effects and the brightness of the backlight yourself.
- Various effects, speed of ignition, brightness, length of steps - all this is configured directly from your phone through a special application that you can download from the Play Market.
- Management is possible, both from your mobile phone, using Wifi, and from a computer.
- The controller is configured over a Wifi network, which the controller distributes. It is enough to connect to the network from a phone or computer and configure.
Please note that similar models are sold on the site, but with manual installation, which makes the installation process more complicated and lengthy.
The controller is designed for LED strips 12-24V for monochrome and RGB.
You need power supply, which is calculated by the power of the strips (not included in set).
For ultrasonic sensors:
1. Do not install a sensor opposite which there is glass / glass panel closer than 2-3 meters away. If this cannot be avoided, then direct the emitter and receiver at an angle to the glass of at least 45 degrees.
2. Do not install the lower sensor between 1 and 2 steps. The distance from the level of the first step to the sensor should be at least 40 cm.
3. Do not install the sensor in a place where on the side of it, parallel to the direction of radiation, an obstacle is located less than 30-40 cm (for example, a wall or a vertical part of a step.)
A shielded cable is recommended for connecting sensors!
Connection schemes of sensors
Picture 1 : Controller wiring diagram using ultrasonic sensors.
Picture 2 : Controller wiring diagram using sensors of other types.
Picture 3 : The principle of connecting colored steps to the stair controller.
Package include :
1. Controller 12-24V for 16 steps
2. Ultrasonic sensor x 2 pcs
3. Night / Day sensor
4. User Manual ( English, Estonian, Russian languages)
NB! Our company always checks the operation of the stair controller before sending it to the client.
The goods are sent to the client 100% in working condition, if something does not work when connected, this means that the controller is connected incorrectly.
Read the instructions carefully!
Instructions for connecting are sent along with the goods, and a link is sent to download materials after purchasing the goods.
If you want to read the instructions before purchase, please contact us.
- Sensor size
- 4.5 x 2,5 x 2 sm
- 8 programs
- Quantity of stairs
- Package contents
- Controller, two US sensors, sensor night/day
- 7 x 9 x 1 sm