SIDE ADMS9CL - has a large 3.5-inch display, automatic selection of the measured parameter, and a very thin body of 12 millimeters.
It differs from the ADMS9 model in a brighter image due to the EBTN (with changed crystal polarization) display matrix with backlight, which allows you to measure (control) parameters even in low light conditions
It differs from the simplified ADMS7 model in the presence of capacitance measurement, diode test, increased resistance measurement range and more beautiful display backlight.
Opportunities:
Voltage measurement. The range of measured voltages of alternating and direct current is from 0 to 600 Volts.
Resistance measurement. ADMS7 measures up to 10 MΩ.
Frequency measurement. Measures frequency in the range from 0 to 1000 Hz.
Capacitance measurement. ADMS9CL measures capacitance from 0.5 to 6000uF.
Determining the capacitance of a capacitor is no longer a problem. ADMS9CL measures capacitance from 0.5 to 6000uF.
Diode test. This multimeter has the ability to test the diode (passing electric current in one direction).
Call mode. Sometimes a function is needed - the ability to "ring out" the circuit and understand where the break occurred.
Non-contact method for determining the voltage in the network. It is enough to bring the multimeter to the socket or wire, and by the sound signal and visual indicator you can find out about the presence of voltage in the network.
Definition of "phase".
Lantern.
Characteristics:
Material: ABS plastic
Color: black + red
Display: LCD, 9999 counts
LCD Display Size: 3.5"
Power supply: 2 * CR2032 battery, 3V, 210mAh (included)
Sampling time: 3 times / sec
Automatic shutdown time: 3 minutes
Backlight: 15 seconds auto standby
Constant pressure:
Range: 600V
Resolution: 0.1V
Accuracy: ± (0.8% + 3 counts)
Sensitivity: 0.5V DC minimum
Input impedance: 10 MΩ
Maximum input voltage: 600 V DC or AC (RMS)
AC voltage:
Range: 600V
Resolution: 0.1V
Accuracy: ±(1.2% + 5 counts)
Sensitivity: minimum AC voltage 1V
Input impedance: 10 MΩ
Maximum input voltage: 600 V DC or AC (RMS)
Frequency Range: 50Hz ~ 60Hz True RMS
Resistance:
Range: 10 MΩ
Resolution: 1Ω
Accuracy: ±(1.2% + 3 counts)
Overload protection: 250 V DC or AC (RMS) maximum
Frequency:
Range: 1000 Hz
Resolution: 1 Hz
Accuracy: ±(2.0% + 10 counts)
Frequency range: 10Hz ~ 1000Hz
Allowed value above ACV1V
Calling:
Accuracy: If the resistance is < 30 ohms, the buzzer sounds continuity.
Overload protection: 600 V DC or AC (RMS) maximum
Q ~ Warning:
Low Range: 1/3 analog bar is displayed on the screen, the buzzer sounds a slow alarm.
Medium Level: Displays 2/3 of the analog bar on the screen, the buzzer sounds a fast alarm.
High Range: Displays the full analog bandwidth on the screen, the buzzer emits a very loud alarm.
Capacity:
Range: 1000uF/0.1uF, 6000uF/1uF
Accuracy: 3.5% + 8 counts, 4.5% + 10 counts
Overload protection: 250 V DC or AC (RMS)
Minimum measuring capacitance 0.5 µF
Diode: automatic identification of diodes less than 1.0V
Size: 135*68*13mm
Weight: 111g
Equipment:
1 * Digital Multimeter
1 * Probes
1 * Strap
1 * box
Data sheet
- Model
- BSIDE ADMS9CL
- Capacitance
- 0,5nF-6000μF
- Material
- ABS Plastik
- Voltage
- 0-600V
- Size
- 135x68x13mm
- Source of power
- 2xCR2032 batteries
- Resistance
- 0-10MΩ
- Color
- Black
- Certification
- CE, RoHS
- Warranty
- 1 years
Comments All reviews
Summary
0
(0 Reviews)
Select a row below to filter reviews.
No customer reviews for the moment.