Touch Sensor Switch On/Off Memory Dimmer recessed 4A 12-24VDC Black

With memory external switch on/off and dimmer:

Operations:

• Originally "Off' when the power is connected.
• Quick touch(time is less than 550ms) can turn ON/OFF the light.
  One touch to turn on; touch again to turn off. The lamp is 90% bright when it is on.
• Hold on touching (time is above 550ms) can adjust the brightness endlessly. It will reduce the brightness endlessly to the minimum in 3 seconds holding on when the light is on. It will increase the brightness endlessly to 100% in 3 seconds holding on when the light is off.
• Quick touch and hold on touching can be chosen anytime without any collision.

Installation Steps:

• • Step 1: Cut a diameter 18mm hole at the fixture.
  • Step 2: Put the detector head into the diameter 18mm hole.
  • Step 3: Connect wires to the input end and output end of the LED light.

Parameters:

• ON / OFF + dimming function.
• Input Voltage: 12V-24VDC.
• Output Voltage: 12V-24VDC.
• Input Current: 4A.
• Load around 48W for 12V, and 96W for 24V.
• Input and output cable length: DC wire 15cm.